The best magazine
- 1). Slide the battery chamber lid open on the external flash device, insert the batteries, then slide the chamber lid shut once more.
- 2). Ensure that both the flash and the camera are turned off. Unlock the mounting foot but rotating the lever anti-clockwise. Slide the mounting foot into the accessory shoe at bottom of the camera. Turn the lock lever to "L" to lock the camera in place.
- 3). Hold down the flash head release button and tilt the flash head forward 90 degrees into the horizontal position.
- 4). Switch both devices on using their respective power buttons. On the flash, press "Mode," rotate the selector dial until "TTL BL" is displayed on screen in the top left corner and push "Ok" to save.
- 5). Lightly push down the shutter button on the D70 to activate the ready light. When the light is on, you can take a picture: point the camera at the subject of the photo and push the shutter button all the way down to capture a photo -- the external flash will operate automatically while the photo is being taken.
Source: ...