The best magazine
- 1). Connect the coaxial cable running from the satellite dish into the "In" port on the Coolsat 4000 receiver.
- 2). Insert the RCA audio/video cables into the "Video Out" ports on the Coolsat 4000 receiver.
- 3). Plug the opposite ends of the audio/video cables into the "Video In" ports on your television.
- 4). Power on the television and the Coolsat 4000. Press "Video" on the television, and the programming from your FTA receiver appears on the screen.
- 5). Adjust the stations with the Coolsat 4000 remote control until you find your local station. These stations are usually listed below the "100" channel mark.
Source: ...