Instructions for Programming a Panasonic KX-T7030 Phone System

Initial Setup

• 1). Set the contrast of the display by moving the "Contrast" selector switch to the desired setting. You have the choice between "High," "MD" and "Low."
  
  
• 2). Determine if you want to use a headset or a handset while at your desk. Move the "Handset/Headset" switch to the desired option.
  
  
• 3). Adjust the volume of the headset or handset by using the "Handset Volume" selector. Move the selector to set the desired volume level.
  
  
• 4). Set the volume of the ringer by moving the "Ringer" selection switch. You have the option for "High," "Low" or "Off."
  
  
• 5). Change the volume level of the speaker by using the "Volume" selector. Slide the selector to the desired volume level.
  
  

Program the Phone

• 1). Verify that you have the handset set on the hook. Set the "Memory" switch to the "Program" option to put the phone in programming mode.
  
  
• 2). Press the programmable feature button "F" that you want to program. Enter the one-touch code to use to dial, such as "3."
  
  
• 3). Enter the phone number to dial by pressing the numbers on the keypad.
  
  
• 4). Press the "Auto Dial Store" button to complete the button programming. Move the "Memory" switch to the "Set" option to exit the Programming Mode.
  
  
• 5). Repeat this process to program another programmable feature button.