Modern Driver Authorization System with Powerful Radio Remote Control Technology

Driver authorization system is really necessary for the bulk transport system. In modern days radio remote controls are used to detect an unauthorized use of vehicles. These modern days' radio remote controls are made with powerful wireless transmitter in order to increase productivity and ensure safety. These modern Driver Authorization Systems are manufactured especially for using in commercial vehicles and machinery. The wireless transmitter of this unique device protects the vehicle from unauthorized engine start or movement depending on the customer's application. In a normal state, the system is armed automatically each time when the key is turned off. At the same time the system is disarmed when a correct user code is entered.

All models of these modern radio remote control devices include a low powered microcomputer controlled ignition lock out system. The installation of this system takes more or less 30 minutes. The wireless transmitter is constructed in a sealed cast aluminum enclosure in order to maintain the durability of the system. Normal 12V power supply is used as a chief power connection of the remote control.

The system gets activated during the air switch park brake interlock. During an unauthorized use if the park brake is released the engine gets locked out. The driver authorization system is disarmed by entering a three to nine digit ID code into the keypad. This ID code is can be selected by the truck owner and it is programmed into the unit using a €master code' assigned to the truck owner. The truck driver can change the driver's authorization code by entering the master code. When a master code is entered, the ID code is erased properly and the device is set into a €learning state' where you can again a new code. Normally three master codes are provided by most of the manufacturers to key management as required.

In order to start the engine of the vehicle as well as the machinery, you need to enter the valid ID code. If an incorrect code is entered more than five times the system will LOCK automatically for at least ten minutes before allowing additional code entry. You can always detect the position when anyone wants to start the engine by entering invalid ID code as there will be a LED indicator. During a multiple incorrect code entry there will be an alternating green and red flash in LED indicator. Apart from that, LED indicators show red for system armed, green for system disarmed, and flashing red for auto shut down, flashing green for changing ID codes.

The system includes a keypad unit with hidden enclosure screws. The compact keypad unit can be installed anywhere in order to maintain a convenient day to day use. The user will also get a sealed parking brake low pressure switch with DOT quick connect T fitting and a sealed engine kill relay along with the other system accessories. Apart from that the manufacturers will provide complete installation guide. All the components of this Driver Authorization System are pre-wired with quick connect electrical and air line fittings.