How to Program the Verizon FiOS Remote

Get Codes

• 1). Turn on your television and FiOS set-top box.
  
  
• 2). Press the "Menu" button and scroll down to Help. Press the right arrow on the remote. Once on the In-Home Agent title, press the right arrow again. Scroll down to Program Remote and press "OK," then "OK" again.
  
  
• 3). Select your remote on the guide listed. It is most often the first option listed, but if you're unsure, open the back of your remote where the batteries are and find the model number. Match that with the remotes listed. Press "OK" and select the device you want to program -- i.e., TV, DVD, Surround Sound. Press "OK."
  
  
• 4). Use the arrows on the remote to spell the name of the device you are trying to program, pressing "OK" for every letter you want. As you select letters, FiOS narrows down your choices. Press the right arrow until you are on the available choices and press "OK" on your device.
  
  
• 5). Press "OK" again to get all the codes for your device.
  
  

Program Your TV

• 1). Press and hold down the "TV" button on the remote for a few seconds and press the "OK" button at the same time.
  
  
• 2). Release the buttons, and they should both blink twice.
  
  
• 3). Enter the four-digit code for your TV and wait for the red light to blink three times.
  
  
• 4). Press the Power" button while aiming the remote at your TV. If it works, your TV is programmed. If not, try another code following the same process.
  
  
• 5). Repeat this process for each device you want to control with your remote, pressing the appropriate button in place of the "TV" button.