The best magazine
- 1). Scrape off as much of the loose tar and felt as possible with a long-handled floor scraper.
- 2). Apply mineral spirits to a clean rag. Apply the rag to the floor, let it set for a moment to soften the adhesive and begin scrubbing. The mineral spirit application may be all you need to remove the tar and felt.
- 3). Use a heat gun to remove the tar and felt. Keep the heat gun moving as you work to avoid scorching the wood floor. Work in small areas, heating and scraping as you go. If you prefer not to use a heat gun, see Step 4.
- 4). Apply a citrus-based paint stripper according to the manufacturer's directions. In general, the stripper is liberally applied, allowed to set for several hours and then scraped off, taking the adhesive with it. Citrus-based strippers have a less objectionable odor and lower toxicity than the more volatile methylene chloride strippers.
Source: ...