The best magazine
- 1). Place the Lazy Susan on its side so you can see the mounting plate to which the shelf attaches. Remove the screws that secure the mounting plate to the smallest shelf using a screwdriver.
- 2). Rotate the mounting plate until you can see the screws that retain the roller bearings. Slide the screwdriver through the holes in the mounting plate and then remove the screws. You must rotate the mounting plate the full 360-degrees to locate all of the retaining screws for the bearing.
- 3). Pull the shelf off the shaft and then pull the bearing off the shaft.
- 4). Repeat the process for each additional shelf.
Source: ...