The best magazine
- 1). Measure the circumference of the washers. Add one inch to this measurement.
- 2). Cut a piece of thin, flexible plastic to the length of measurement. Make the width of the shade between 9 and 12 inches, depending on the size of the lamp. Cut a piece of fabric the same measurements as the plastic.
- 3). Brush some glue onto the plastic sheet. Place the fabric on top of the plastic sheet and remove any wrinkles. Before the glue dries, apply a long bead of tacky glue to the top and bottom edges. Wrap the lamp washers along the top ½ inch of each side of the plastic. Use clothespins to hold the shade in place. Allow the shade to dry overnight.
- 4). Add any additional glue where necessary to fix any gaps. Glue the two sides of the plastic together as well. Remove the clothespins.
- 5). Add a border of trim to the base of the lampshade with glue, if desired. You can also string a beaded chain below the lampshade to give the shade a chandelier-like appearance. Poke tiny holes into the plastic and wrap the ends of the chain through the holes using jewelry pliers.
Source: ...