Ultimate Sidebar

How to Build a Toy Car Workshop

104 3
    • 1). Cut off the top of the box and reinforce all box seams with masking tape for strength.

    • 2). Place the box open side down and cut out a large garage door-sized opening in the front of the box, approximately 28-inches high and 18-inches wide. Cut out a door-sized opening, approximately 15-inches high and 8-inches wide next to the garage door.

    • 3). Paint the entire outside of the box the color of choice and paint a sign over the garage door, for example, "Will's Garage," or "Sue's Engine Repair Shop."

    • 4). Create car lifts with the empty spools.

    • 5). Make a service counter with a 6-inch strip of 2-inch wide poster board folded every 3-inches lengthwise in an upturned "U" shape.

    • 6). Make chairs from 3-inch strips of 1-inch wide poster board folded every inch in an "h" shape. Tape a 1-inch square section of poster board to the back of the chairs for the bottom left section of the "h" shape.

    • 7). Make a toy television set to measure 1-inch, by 1-inch by 1/4-inch from the air drying clay. Paint a scene on the television set with the poster paint.

Source: ...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.