The best magazine
- 1). Research the character R2-D2 by watching a marathon of the Star Wars films. If you are not up to movie watching, you can find information in books, such as the "Star Wars Essential Guide to Droids."
- 2). Draw out plans on a piece of paper. Detail how the shape of the feet and legs will look. Determine how big you want your R2-D2 to be. If you have a small supply of bricks, a small R2-D2 can be built.
- 3). Lay four blocks close together in the shape of a square. Place two blocks in the center, to connect the four pieces together. This will be one foot for your R2-D2. Repeat this step to construct another foot.
- 4). Attach two Legos at a time on top of each foot, to a height of six inches. Use two longer Lego bricks at the 2-inch and 5-inch marks. This will be the legs with two supports pointing inwards. Measure for the height of the legs with a ruler.
- 5). Connect two long pieces of brick to the supports on the legs. These need to be positioned parallel to the legs.
- 6). Construct a square from single bricks that is three to four inches wide. Leave the corners of the square open to give the illusion that it is round. Add a second row of bricks on the inside.
- 7). Add additional layers to a height of two and a half inches; interlock the bricks to construct the bottom half of the body.
- 8). Attach the bottom section of the body to the lower support on each leg. Add additional bricks to the top of the body to the level of the second support.
- 9). Construct another square that is three to four inches wide. This will be the beginning of the dome for your R2-D2. Attach single bricks side-by-side along the perimeter. Attach another row that is positioned on only half of the previous row. Repeat this process until you have a dome shape.
- 10
Set the dome on top of the lower half of the body and the second support on the legs.
Source: ...