The best magazine
- 1). Turn off your shower's water supply by turning the valve to the closed position.
- 2). Remove the cap on the end of the shower faucet handle by prying it off with a screwdriver. Locate the screw securing the handle to the faucet. Loosen this with a screwdriver and remove the handle.
- 3). Unscrew the round bonnet cap under the handle and remove the cartridge cap and sleeve underneath. Slide the cartridge out of the faucet.
- 4). Inspect the cartridge for signs of wear and tear or damaged parts. Insert a new cartridge in place of the old one. Press it into the faucet after lining up the holes on the cartridge with the inner faucet valves.
- 5). Attach the sleeve and cap and then twist the bonnet cap back onto the faucet. Tighten it until it is secure.
- 6). Slide the Valley faucet handle back onto the end of the cartridge. Insert a new handle screw in the handle and tighten it with a screw driver until it is secure. Test the faucet for leaks by turning the water back on and using the faucet.
Source: ...