An LG Washer and Dryer Combo Hookup How-to

Connecting Water Lines

• 1). Insert the rubber seal that comes with the appliance into the threaded section at each end of the two water hoses provided with the appliance.
  
  
• 2). Attach the hose from the red hot water inlet on the back of the appliance. Attach the cold water hose to the blue cold water inlet.
  
  
• 3). Use a wrench to securely tighten these connections so that no leaks occur.
  
  
• 4). Attach the hot water line to the hot water tap. Attach the cold water line to the cold water tap. Use a wrench to securely tighten these connections so that no leaks occur.
  
  
• 5). Turn the water taps fully to open them.
  
  

Connect the Drain Line

• 1). Clip the elbow bracket into the end of the hose. The elbow bracket is included in the appliance's packaging.
  
  
• 2). Tie the bottom of the drain hose to the leg of a laundry tub or to the base of a standpipe.
  
  
• 3). Hook the elbow bracket into the laundry tub or inside the standpipe.