The best magazine
- 1). Pry the window switch bezel from the left-rear door panel with the trim tool. Turn the bezel over and disconnect the wiring harness from the switch by hand.
- 2). Remove the screws holding the door panel to the door using the Phillips screwdriver. Lift the door panel up and off the door by hand. Disconnect the wiring harness from the courtesy lamp, if there is one, before setting the panel aside.
- 3). Lift the window glass to the top of the channel and secure it in place with the packing tape to ensure it doesn't fall when you remove the window motor.
- 4). Unbolt the window motor from the window regulator and door using the socket set. Unplug the wiring harness from the motor and remove the motor from the door by hand.
Source: ...