The best magazine
- 1). Choose a planter with a broad base so that it isn’t easily knocked or blown over.
- 2). Cut the ABS 8 inches taller than the pot’s depth.
- 3). Lay a square of screening material on the bottom of the pot, over the drainage holes.
- 4). Add one inch of lava rock to the pot and stick the ABS into it, in the center. Add the remaining lava rock to the pot, spreading it evenly.
- 5). Mix the concrete according to package instructions and add three inches of it over the lava rocks in the container. Use a trowel or other flat instrument to slope the concrete slightly away from the ABS. Use a carpenter’s level to check that the container is level and the ABS is perfectly vertical.
- 6). Use the saw to cut the dowel into six-inch pieces. Stick them through the concrete, while it is still wet, equally spaced around the pot to create drainage holes. Move the dowels in a circular motion after you’ve placed them in the concrete. This allows for easier removal when the concrete dries. Remove the dowels the next day, after the concrete sets.
- 7). Fill the pot to within two inches of the top with potting soil. Plant ornamentals around the ABS and water until the excess drains from the bottom of the pot.
Source: ...