The best magazine
- 1). Press the "Eject" button located on the base grille next to where the filter is secured. The filter will pop out.
- 2). Pull the filter straight out of the base grille. Turn the cap located on the end of the filter counterclockwise to remove it from the old filter. Keep the cap, as it will be used to secure the new filter.
- 3). Align the ridges on the cap with the arrow printed on the replacement filter. Turn the cap until it snaps securely in place.
- 4). Push the filter into place on the base grille. Once the filter is securely and properly in place, the eject button will pop back out signaling the filter is engaged and ready for use.
- 5). Press the "Reset filter" button once on the water and ice dispenser control panel. This will reset the filter light and alert you when the replacement filter needs to be changed.
Source: ...