The best magazine
- 1). Lay the sander on its handle. Tilt it back over the wheels, because this will make it easier to raise the machine once the pad is applied.
- 2). Locate the opening at the bottom of the sander. You'll see a series of little teethlike spikes. Push the foam-backed pad with the peel-off adhesive surface onto the teeth. Make sure it is adhered firmly to the spikes.
- 3). Remove the backing from the foam padding under the sander. Push the sanding pad onto the adhesive with the grit side out. Make sure that it is firmly affixed. Flip the sander back to an upright position.
Source: ...