The best magazine
How to Adjust the Tension on an RV Slide-Out Awning
- 1). Park the RV and set the brake. Level the rig using its jacks and level system.
- 2). Step up to the awning and clear out any leaves or twigs from the awning seam. Open the slide-out. Slide-out awnings extend automatically when the slide-out is deployed. Let both the slide-out and the slide-out awning open all the way.
- 3). Place the step stool near the lip of the awning. Push the aluminum pole in its extended length up to the RV wall and down to the lip of the awning, under the awning itself. Position so the pole pushes the awning out, adding tension to the fabric. Special aluminum poles often accompany the RV awning for this use.
- 4). Inflate the awning's air bladder to provide tension to the awning fabric. If your RV slide-out awning is equipped with an air bladder, use the internal air pump and flip the switch to "on" to inflate and add tension to the fabric.
- 5). Push the foam pieces up and under the bottom lip of the awning to provide further support and tension to the fabric if needed. Stuff the foam under the awning roller near the end of the awning itself.
Source: ...