The best magazine
Fire Sprinkler System is considered as an effective tool for protecting lives and properties. In effect, Fire sprinklers provide 24/7 protection against any unexpected fire emergencies, and thus preventing further damage. Fire sprinklers are connected to a water distribution system with adequate pressure and flow rate. Fire sprinklers were used for large commercial buildings, and factories in the beginning. Of late, fire sprinklers are in use for home and small building at a very cost-effective price.
Installation of Fire Sprinkler System can be considered for old home/commercial infrastructures to ensure the safety of lives and property. Many people lose their lives or become physically retarded every year in fires accidents due to the absence of basic fire sprinkler system installed at their premises. It is always good to have smoke alarms and fire extinguishers to ensure safety, when there is a fire.
How to install Fire Sprinkler System?
Installation of a fire sprinkler system would turn out to be a complicated procedure without professional help. The installation requires drilling of several holes through the ceilings/walls, wall demolition, and pipe fitting. Hence, doing self is not the best option unless you are a certified fire sprinkler system contractor.
Here are a few guidelines while looking to install a fire sprinkler system in your home or business place;
1. Always do search for a professional licensed contractor who can examine home / business premises, and can decides on the right type of fire sprinklers to install. One can find a fire sprinkler system contractor by searching online or through your phone directory.
2. Make sure the contractor is a licensed contractor specialized in retrofitting of residential / commercial fire sprinkler systems. Once you hire a contractor, please ensure that the contractor examines and inspects the premises. After initial inspection, the contractor will figure out where the sprinkler heads will go in each room by taking measurements. Also, ensure that the contractor to check adequate pressure and flow-rate and come up with a comprehensive plan to install sprinkler system. In case there is a drop in water supply pressure then there is a need to install Fire Hoses and Fire Pumps to overcome the situation.
3. In order to install fire sprinkler systems there is a need to drill holes through floors, ceilings and wall. Hence, it is advisable to remove wall papers, board, from the wall.
4. The pipes have regular water supply and are made up of fire and heat resistant CPVC (chlorinated polyvinylchloride).
5. All pipe joints to be sealed watertight to prevent water leakage.
6. Always ensure proper tightening of the sprinkler heads to the corresponding holes in the walls or ceilings. The fire sprinkler heads will extend out only a few inches from the wall or ceiling.
How Fire Sprinkler System works?
When a sprinkler operates the following sequence of events will happen:
Heat from the fire causes the glass bulb to break.
This will release the cap.
Water is released onto the diffuser.
Water puts out the fire.
Source: ...