How to Open a Liberty Brand Safe

Open "Old-Style" Liberty Safes

• 1). Rotate the dial counterclockwise through four full turns. Stop at the 1st number of your combination.
  
  
• 2). Turn the dial clockwise past the second number of your combination twice. Stop on it the third time.
  
  
• 3). Rotate the dial counterclockwise past the third number of your combination once. Stop on it the second time.
  
  
• 4). Turn the dial clockwise until it stops. This usually happens around number "87." Keep turning through any resistance until the dial stops completely.
  
  
• 5). Rotate the safe handle to retract the bolts. You can now pull open the safe.
  
  

Open Liberty Safes Fitted With A S&G Motorized 6120 Lock

• 1). Discharge any static electricity by touching the body of the safe. Position the safe handle between the left and right stop points.
  
  
• 2). Enter your six-digit safe combination using the number buttons. The safe will beep and flash an LED after each key press.
  
  
• 3). Press the "#" button. You will hear the lock retract. Turn the handle and open the safe within six seconds.
  
  

Open Liberty Safes Fitted With A S&G Direct Drive Lock

• 1). Discharge any static electricity by touching the body of the safe. Position the safe handle between the left and right stop points.
  
  
• 2). Turn the keypad counterclockwise to the "Stop" position.
  
  
• 3). Enter your six-digit safe combination using the number buttons.
  
  
• 4). Press the "#" button.
  
  
• 5). Turn the keypad clockwise through roughly 70 degrees until it stops. This must be done within six seconds of pressing "#."
  
  
• 6). Turn the safe handle, and pull open the door.