The best magazine
- 1). Start the motorcycle and let it run for several minutes and then shut it off (this will allow the oil to flow faster). Use a flat wrench, simple trap wrench or ratchet wrench to remove the oil filter.
- 2). Put a larger drip pan under the Harley's oil filter hole to catch all the oil that flows out of the oil tank filter hole.
- 3). Locate your motorcycle's oil tank at the bottom near the transmission.
- 4). Remove the drain plug from the front of the oil tank using a socket wrench, preferably while the engine is warm. Be careful that you don't get burned by hot oil.
- 5). Allow the used oil to run freely and pour squarely into the drip pans. Remove the filter sticks to improve the flow. Let the used oil drain out completely.
- 6). Install a new ten-micron filter by hand, screwing it on tightly into the filter hole.
- 7). Refill your Harley's oil tank with new oil according to the amount and level stated in your owner's manual (around one quart).
- 8). Test-drive your Heritage Harley-Davidson to check the performance of its engine upon oil replacement. Check your oil level and add more lubricant oil as needed.
Source: ...