The best magazine
- 1). Pull the motorcycle to an open, accessible area, and stand the bike on a center stand or lean it against a sturdy, secure surface.
- 2). Crank the motorcycle's handlebars to the right as far as they will go. This will give you a little extra slack in the throttle cable.
- 3). Loosen the bolt at the opposite side of the throttle cable entrance on the throttle assembly using a socket wrench. Slide the throttle assembly off the handlebars.
- 4). Loosen the bolt the rest of the way and remove it. Open the throttle assembly. It simply pries apart from the center. Unhook the throttle cable from its housing.
- 5). Pull the throttle cable through the frame of the motorcycle and down to the throttle housing on the side of the motor.
- 6). Unhook the end of the throttle cable from its mounting location in its housing assembly.
Source: ...