The best magazine
- 1). Put a soft cloth on a work surface. Put the gun-handle frame on the soft cloth with the barrel pointing to the left.
- 2). Attach the two bolt screws to each side of the bottom of the gun-handle frame at the handle with the Phillips screwdriver. Attach the two bolt screws to each side of the top of the gun-handle frame at the top-back edge by the hammer with the Phillips screwdriver.
- 3). Insert the hammer plate into the top-right side of the gun-handle frame. Insert the side locking plate into the upper-left side of the gun-handle frame.
- 4). Insert the hammer-locking bar into the back end of the hammer hole in the gun-handle frame, the "T" point of the hammer-locking bar first.
- 5). Insert the spring into the spring hub. Insert the spring-tube bar into the free end of the spring. Lock the spring-tube bar nub to the right inside of the spring-tube bar.
- 6). Turn the spring-tube bar upside down. Place the spring-tube bar into the spring-tube bar hole on the right-back side of the handle of the gun-handle frame.
- 7). Place the hammer plate, notched end facing up, into the hammer notching plate so that the holes in each line up. Place the hammer notching plate into the back end of the gun-handle frame.
- 8). Insert the handle lever into the bottom of the hammer wheel. Place the hammer wheel into the back of the gun-handle frame. Run the hammer-wheel bar through the gun-handle frame just in front of the hammer.
- 9). Place the gun-handle plate, notching bars up, into the back end of the handle. Place the gun-handle closing plate over the gun-handle plate.
- 10
Place the locking spring onto the end of one of the locking bars. Place one end of the other locking bar onto the free end of the spring. Insert the locking bar into the locking-bar tube at the upper-left edge of the gun-handle frame. - 11
Place the locking-bar plate onto the locking-bar tube at the upper-left edge of the gun-handle frame. - 12
Insert the firing spring into the firing plate. Insert the firing-spring screw into the top of the spring. Insert the firing-plate tab into the bottom of the firing plate. Screw in the screw with the Phillips screwdriver. - 13
Insert the firing plate into the bottom of the handle of the gun-handle frame. Insert the locking tube through the hole in the side of the firing plate. - 14
Place the gun stocks on both sides of the handle of the gun-handle frame. Attach the screws to both sides using the Phillips screwdriver. - 15
Place the barrel-assembly rod into the back end of the barrel assembly. Place the barrel-assembly spring into the back end of the barrel assembly. Place the barrel-assembly locking rod into the back end of the barrel assembly. Place the locking-rod plate onto the locking rod at the back end of the barrel assembly. - 16
Place the barrel through the tunnel in the front end of the barrel assembly. Rotate the barrel so that the hole at the back end of the barrel is facing up. Insert the barrel tube into the back end of the barrel assembly. Screw in the screw with the Phillips screwdriver. - 17
Turn the barrel assembly over. Slide the barrel assembly onto the front end of the gun-handle frame. Pull back on the hammer at the back end of the gun-handle frame. - 18
Insert the trigger-guard latch into the holes above the trigger on the left side of the gun-handle frame. - 19
Insert the gun-barrel mount onto the front of the barrel at the top end. Insert the gun-barrel spring into the hole in the bottom part of the barrel. Insert the barrel-spring rod into the hole in the bottom part of the barrel. - 20
Twist the gun-barrel mount a quarter-turn counterclockwise to lock the barrel spring and barrel-spring rod into position.
Source: ...