The best magazine
- 1). Mix a few drops of dish soap in a bowl of warm water to make a sudsy solution.
- 2). Fill the Aerobed completely with air.
- 3). Rub the soap solution over the mattress with a sponge starting at one corner and working from left to right in sections. When bubbles begin forming, you have found the leak.
- 4). Cut a 1-inch by 1-inch patch of vinyl provided in the Aerobed repair kit. If you do not have a repair kit, cut it from a vinyl shower curtain liner.
- 5). Apply the adhesive provided in the Aerobed repair kit to the back of the patch and place it firmly onto the leak until the glue dries. If you do not have a repair kit, use rubber cement instead of the Aerobed adhesive.
Source: ...