Ultimate Sidebar

Adhering Paper to Wood for Painting

104 2

    Soaking the Paper

    • Before each of the following methods is used, the paper must be soaked in water. Fill a sink or bathtub with warm water and slide the sheets of paper into the water. Let the paper soak for at least five minutes, allowing more time for thicker paper. Remove the paper and place it on a flat surface. Use a sponge as you would use a squeegee on a window to remove excess water and to stretch the paper. Turn the paper over regularly to ensure uniform stretching.

    Glue

    • The easiest and least noticeable way to attach the paper to the wood is to use glue. Once the paper has been soaked, spread a gum-based water soluble glue on the wood and carefully place the paper on top of it. Gently move the paper so it sits neatly and smoothly on the wood. Do not use craft glues like polyvinyl acetate (PVA). This leaves a plastic finish on the paper.

    Staples

    • Place the paper on the wood and gently move it so it is smooth and correctly oriented. Starting with the corners, attach staples to the paper to hold it in place. Using a staple gun is best. The size of the staples depends on the thickness of the wooden board.

    Double-sided Tape

    • Cut pieces of double-sided sticky tape to the dimensions of the paper and attach to the back of the paper. The adhesive on the paper may need to be dampened with a sponge to maximize its effectiveness, but this depends on the tape.

    Thumbtacks

    • After soaking the paper, place it on the wood and move it into place. Secure the paper in place using thumbtacks or drawing pins. This method is best if the paper will be removed at a later date.

Source: ...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.