The best magazine
- 1). Place the glass on the work surface and set the bottle cap on top of the glass. Trace around the cap using the chalk to get a circle.
- 2). Cut along the chalk line using the glass cutter. Hold the cutter at a 45 degree angle and press lightly with the cutter. Push the circle out from the glass, being careful not to break the glass.
- 3). Paint a thin layer of craft glue on one side of the glass using the paint brush.
- 4). Place the washi paper on the work surface with the colored side up.
- 5). Press the circle, with glue side down, to the washi paper. Press it to the part of the washi paper you want for your stained glass design. Hold the glue in place for a few moments to make sure it sticks.
- 6). Cut off any excess paper as close to the glass as possible so that none of the paper sticks out from the edges.
- 7). Paint the back of the washi paper with a thin layer of craft glue to help seal it to the glass. Let the glue dry before continuing.
- 8). Place a dab of super glue on the flat part of the glue-on bail. Press the bail to the back of the washi paper so that the top of the flat part touches the top edge of the circle. The loop sticks up from the top.
- 9). Slip the chain through the loop to complete the necklace.
Source: ...