The best magazine
- 1). Launch your effort with the understanding that when it comes to military shadow box shapes, sizes and configurations, one size doesn't fit all. Gather up items you plan to mount within the framework of the box and estimate the size of the finished project based on them to get started.
- 2). Grab a pen and pencil to sketch out a shadow box based on your measurements, or boot your computer and use your draw program to plot the box's layout. Use these figures as a point of reference: a typical shadow box is 18" square with 3"-high interior dividers attached to a raised, 3"-high frame.
- 3). Purchase a piece of sturdy plywood cut to the size of your finished shadow box with at least half an inch extra on all four sides to accommodate the frame and section dividers. Frame up the entire square so there's a 3" lip/frame around the periphery of the plywood sheet.
- 4). Install picture-hanging hardware to the back side of the unit before you begin working on the section dividers. Cut lengths the molding. Nail or glue molding strips in place to create the maze of boxes on your layout. Sand and smooth surfaces of the shadow box once you're satisfied with the grid you've created. Paint or stain and seal the wood.
- 5). Place items earmarked for the military shadow box into their predetermined sections. Switch items around if you find that one medal or photo looks better elsewhere. Cut sections of Velcro® to size for each piece of memorabilia and then press each into place. No need to hire an honor guard for your shadow box unveiling, since your military man or woman will be too delighted with the results of your efforts to care about the pomp and circumstance.
Source: ...