The best magazine
- 1). Draw a cross shape onto a piece of ½-inch thick plywood. Use a tape measure, carpenter's square and pencil to draw straight lines and produce a cross measuring 30-inches from top to bottom and 15-inches from one side to the other with each section measuring 3 inches wide. Cut the piece out with a miter saw.
- 2). Sand the front, back and all edges of the plywood piece with sandpaper or an orbital sander. Remove rough edges and smooth the front and back surface of the cross for painting.
- 3). Attach a wooden stake to the bottom of the memorial cross to use when installing the cross. Drive a 1-inch nail through the stake and into the back of the plywood cross.
- 4). Paint the plywood and wooden stake with two coats of white acrylic paint, using a paintbrush. Allow the first coat to dry for 15-minutes before applying the second coat on both the front and back of the memorial cross.
- 5). Paint the deceased loved ones name across the 15-inch long beam of the memorial cross in black acrylic paint. Use an artist's paint brush and stencil to produce even lettering.
- 6). Decorate the cross with ribbons and flowers as you desire. To attach the ribbons and lettering use either a hot glue gun or sections of small gauge wire.
Source: ...