The best magazine
- 1). Sweep the patio to remove all dust and debris. Set your garden hose nozzle on the highest pressure setting and hose down the patio to remove any dirt and debris not removed with the broom. Use a scrub brush to remove any harder-to-remove substances. Allow the patio to dry completely.
- 2). Remove loose or peeling paint with a wire brush. Brush firmly across the paint until the surface is smooth. Use medium grit sandpaper, if necessary, to create a smooth finish on the concrete patio. Wipe away debris and sanding dust with a damp rag.
- 3). Fill any cracks in the concrete with rubber filler. Most companies that sell rubber paint sell a thicker version of the paint to use as a filler for cracks. Apply the filler with a putty knife, smooth the top until it's flush with the rest of the patio. Allow the filler to dry completely. Sand any rough edges if necessary.
- 4). Use seam tape to bridge any areas where different surfaces meet, such as wood to concrete or masonry to concrete. Smooth the seam tape over the gap and press firmly to adhere.
- 5). Paint the concrete patio using rubber paint. According to Ames Research Laboratories, rubber paint should be applied thickly, about 1 gallon per 100 square feet, or about the thickness of a dime. Apply a second coat after the first coat is dry to the touch.
- 6). Allow three to four days for the rubber paint to fully cure. Do not allow foot traffic on the patio until the paint is completely dry.
Source: ...