The best magazine
- 1). Choose an appropriate clamp for your project. Wood clamps come in different designs and sizes and in many cases are interchangeable, but some clamps work better for certain types of projects. For example, you may want a smaller clamp if you're working with small pieces or need more of the wood to be left uncovered in order to work on the project while it's clamped. For decorative pieces, choose a clamp that disperses pressure across a wider area. Make sure the clamp you choose is big enough.
- 2). Adjust the clamp so the opening is close to the size you'll need before applying the glue. Hold the two pieces of wood you intend to glue together with your hands and estimate the distance for the clamp setting with your eye. Set the clamp to a distance a little wider than this to prevent fumbling later; for screw clamps, this involves loosening or tightening the screw. With squeeze-pump clamps, adjust the size using the release trigger located near the squeeze handle.
- 3). Apply glue to the wood pieces and press them together. Wipe away any excess glue that may ooze out from between the wood pieces using a wet paper towel or rag in order to keep the project clean and prevent gluing the clamp in place accidentally.
- 4). Attach the clamp. Position the clamp so that the flat lips are flush against the outsides of the glued pieces of wood.
- 5). Tighten the clamp. Twist the screws, or squeeze the pump handle (depending on the type of clamp) until you can't tighten the clamp any further.
- 6). Wait for the glue to dry according to the instructions on the bottle. Remove the clamps.
Source: ...